GENUINE 107961 Siemens Deka 60 LB High Impedance Fuel Injectors (1) Per NEW

  • 05

$20.96 (-40%)

389

  • Manufacturer Part Number: FI114961
  • Brand: Siemens Deka VDO
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Other Part Number: 107-961
  • Interchange Part Number: 107961
  • Manufacturer Warranty: Yes

    • Payments
    Shipping
    Returns
    Terms
    Guarantee
    About Us
    Siemens Deka-US
    International Service Welcome
    Free Shipping In The Continental USA / International Service Welcome
    Genuine Siemens Deka 60lb High Impedance Fuel Injector (1) Pc
    These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.
    Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.
    Features
    Genuine, reliable Siemens Injectors
    Standard Long Length: 60mm o-ring to o-ring
    Excellent response characteristics
    Robust Design
    High Impedance
    Low Impedance performance characteristics with High Impedance Compatibility
    Specifications
    Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)
    Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min
    Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min
    Gain: 0.11ms/mg
    Offset: 0.055ms
    Turn on time @ 14VDC: 1.14ms
    Turn off time: 0.85ms @ 600KPa
    Connector: Bosch EV1
    Series: DEKA 4 ( DEKA IV )
    Orifice Type: Multi-orifice
    Spray Pattern: 30 Degree Spray Cone
    Factory fitted with Viton upper and lower o-rings
    Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
    “This product may NOT be legal for sale, installation, or use on a pollution controlled vehicle in the state of California.  This product is NOT CARB legal. Legal only for racing vehicles in closed course competitions for Off Road Use Only.”
    If the item prohibits the sale in the state of California per (CARB) manufacture listing, the purchase will be notified and refunded. Please consult with in the state’s guidelines further product information before purchase.

    Main Menu